MATERIAL HANDLER

Material handler

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-A1
logo-helperx-onboard-weighing-dynamic-weigh-systems-south-africa
logo-millenium5-onboard-weighing-dynamic-weigh-systems-south-africa

The installation of accurate and EASY-to-view onboard weighing solutions and payload monitoring enable operators to control loads moved.

The VEI Helper X is our most advanced weighing instrument where our 35 years of knowledge put to the test so you can perform the most demanding applications. Helper X reduces or eliminates paperwork and eases data management with its ipotweb cloud service.

VEI Helper X is robust, easy to use and mounts into your material handler cab. With accuracy typically within +/- 1%, the system provides essential information to improve your operations.

  • Increase process efficiency
  • Increase traceability
  • Improve work safety

The VEI Millennium 5 is the middle-class scale specially designed to prevent overloads on any machine size and under the most demanding applications and tasks. The interface for the operator is intuitive and key loading information is selectable to print or download easily. It’s the right balance between performances and features.

Integrates seamlessly with :

  • Ipotweb

TAKING WEIGHING INTO THE 21ST CENTURY

Loader scales | Load cells | Scale systems

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-1
9

ONBOARD WEIGHING SYSTEM IN CABIN

The Head unit is perfectly positioned in the cabin to give you the best view of its display and ease in choosing the data you want to enter before starting the load. Its swivel mount allows you to direct it easily for optimal viewing and interaction

9

WEIGHING BLOCK TO DETERMINE THE APPLIED LOAD

The GR2 weighing block, is purpose built to replace the original yoke placed between the arm and the tool. The load sensor placed inside it is protected by a smart mechanical design that safeguards it in the event of heavy compressions due to the way the tool is used. Certified welds ensure robustness and regulatory compliance. The sensor cable is protected by a hydraulic-type pipe with a metal mesh to ensure robustness against impacts.

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-2
Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-2
9

WEIGHING BLOCK TO DETERMINE THE APPLIED LOAD

The GR2 weighing block, is purpose built to replace the original yoke placed between the arm and the tool. The load sensor placed inside it is protected by a smart mechanical design that safeguards it in the event of heavy compressions due to the way the tool is used. Certified welds ensure robustness and regulatory compliance. The sensor cable is protected by a hydraulic-type pipe with a metal mesh to ensure robustness against impacts.

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-3
9

WIRELESS WEIGHING BLOCK TO DETERMINE THE APPLIED LOAD

The wireless version of the GR2 weighing block eliminates the connection cable to the device, through a radio connection that allows the pairing only to the equipment on board of the machine without interference by machines that work nearby.

Designed for a complete management by yourself, the on-board weighing system provides you with parameters such as signal quality, battery charge, radio transmitter and receiver diagnostics. Using commercially available rechargeable batteries allows for rapid replacement in the unlikely event of a failure.

 

9

QUICK DISCONNECT CONNECTOR

This heavy duty connector is positioned to allow rapid disconnection of the GR2 weighing block. Perfectly waterproof it assures a secure connection

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-4
Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-4
9

QUICK DISCONNECT CONNECTOR

This heavy duty connector is positioned to allow rapid disconnection of the GR2 weighing block. Perfectly waterproof it assures a secure connection

Material Handler-onboard-weighing-dynamic-weigh-systems-south-africa-7
9

PEDAL FOR WEIGHT TOTALIZATION

Installed in a convenient location to you, it totalizes the weight when you want it to.

VEI_2

Our Products

VEI On-board weighing solutions from Dynamic Weigh Systems help you achieve maximum productivity, maximise profits, and minimise downtime. Dynamic Weigh Systems On-Board Weighing Solutions, Loader scales, Load cells and Vehicle Scale systems are the industry's most reliable.

Contact Us

We'd love to hear from you!

9 + 8 =

dynamic-weigh-systems-onboard-weighing-systems-logo-500

Ivan van Heerden  (Director)
Cell: +27 (0)82 965 2406
Skype: ivanvanh
Email: ivan@dynamicweighsystems.com


Ben du Preez (Technical Sales)
Cell: +27 (0)82 377 4371
Email: ben@dynamicweighsystems.com